Publications in Scientific Journals

  1. E. Aschauer, S. Sackl, T. Schachinger, T. Wojcik, H. Bolvardi, M. Arndt, P. Polcik, H. Riedl, P.H. Mayrhofer:
    "Nano-structural investigation of Ti-Al-N/Mo-Si-B multilayer coatings: A comparative study by APT and HR-TEM";
    Vacuum, 157 (2018), 173 - 179. BibTeX, More information


  2. S. Holly, P. Haslberger, D. Zügner, R. Schnitzer, E. Kozeschnik:
    "Development of high-strength welding consumables using calculations and microstructural characterisation";
    Welding in the World, 62 (2018), 451 - 458. BibTeX,


  3. A. Jacob, E. Povoden-Karadeniz, E. Kozeschnik:
    "Revised thermodynamic description of the Fe-Cr system based on an improved sublattice model of the σ phase";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 60 (2018), 60; 16 - 28. BibTeX,


  4. J. Kreyca, E. Kozeschnik:
    "Analysis of the Temperature and Strain-Rate Dependences of Strain Hardening";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 49 (2018), 1; 18 - 21. BibTeX,


  5. J. Kreyca, E. Kozeschnik:
    "State parameter-based constitutive modelling of stress strain curves in Al-Mg solid solutions";
    International Journal of Plasticity, 103 (2018), 103; 67 - 80. BibTeX,


  6. K. Leitner, D. Scheiber, S. Jakob, S. Primig, H. Clemens, E. Povoden-Karadeniz, L. Romaner:
    "How grain boundary chemistry controls the fracture mode of molybdenum";
    Materials & Design, 142 (2018), 36 - 43. BibTeX,


  7. M. Lückl, T. Wojcik, E. Povoden-Karadeniz, S. Zamberger, E. Kozeschnik:
    "Co-Precipitation Behavior of MnS and AlN in a Low-Carbon Steel";
    Steel Research International, 89 (2018), 3; 1700342 - 1700350. BibTeX, More information


  8. L. Qin, A. Redermeier, C. Dellago, E. Kozeschnik, C. Karner:
    "Rigid-lattice Monte Carlo study of nucleation kinetics in dilute bcc Fe- Cu alloys using statistical sampling techniques";
    Acta Materialia, 159 (2018), 429 - 438. BibTeX,


  9. S. Reisinger, E. Kozeschnik, G. Ressel, J. Keckes, A. Stark, S. Marsoner, R. Ebner:
    "Strain energy contributions on the bainitic phase transformation in a CrMoV steel during continuous cooling";
    Materials & Design, 155 (2018), 155; 475 - 484. BibTeX,


  10. H. Riedl, T. Glechner, T. Wojcik, N. Koutná, S. Kolozsvári, V. Paneta, D. Holec, D. Primetzhofer, P.H. Mayrhofer:
    "Influence of carbon deficiency on phase formation and thermal stability of super-hard TaCy thin films";
    Scripta Materialia, 149 (2018), 149; 150 - 154. BibTeX, More information


  11. N. Ritter, R. Sowa, J. Schauer, D. Gruber, T. Göhler, R. Rettig, E. Povoden-Karadeniz et al.:
    "Effects of solid solution strengthening elements Mo, Re, Ru, and W on transition temperatures in nickel-based superalloys with high gamma´-volume fraction: comparison of experiment and calphad calculations";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 49 (2018), 8; 3206 - 3216. BibTeX,


  12. T. Wojcik, M. Rath, E. Kozeschnik:
    "Characterisation of secondary phases in Ni-base superalloy Rene 65";
    Materials Science and Technology, 34 (2018), 13; 1558 - 1564. BibTeX, More information


  13. M. Ahmadi, M. Rath, E. Povoden-Karadeniz, S. Primig, A. Danninger, M. Stockinger, E. Kozeschnik:
    "Modeling of precipitation strengthening in Inconel 718 including non-spherical γ″ precipitates";
    Modelling and Simulation in Materials Science and Engineering, 25 (2017), 5, paper 055005; 2 - 17. BibTeX, More information


  14. M. Bahmani-Oskooee, S. Hossein Nedjad, A. Samadi, E. Kozeschnik:
    "Cu-bearing, martensitic stainless steels for applications in biological environments";
    Materials & Design, 130 (2017), 442 - 451. BibTeX,


  15. H. Buken, E. Kozeschnik:
    "A Model for Static Recrystallization with Simultaneous Precipitation and Solute Drag";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 48A (2017), 6; 2812 - 2818. BibTeX, More information


  16. S. Dépinoy, C. Toffolon-Masclet, S. Urvoy, B. Marini, F. Roch, E. Kozeschnik, A. Gourgues-Lorenzon:
    "Carbide Precipitation in 2.25 Cr-1 Mo Bainitic Steel: Effect of Heating and Isothermal Tempering Conditions";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 48 (2017), 5; 2164 - 2178. BibTeX,


  17. F. Imtiaz, E. Kozeschnik:
    "Investigation of Austenite-to-Ferrite Transformation in Ultralow and Low-Carbon Steel Using High-Speed Quenching Dilatometry and Thermokinetic Simulation";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 48 (2017), 7; 3193 - 3204. BibTeX,


  18. A. Jacob, E. Povoden-Karadeniz, E. Kozeschnik:
    "The Cr-Nb-Si system: Improved thermodynamic modelling and its use in simulation of Laves phase in steel";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 56 (2017), 56; 80 - 91. BibTeX, More information


  19. J. Kreyca, E. Kozeschnik:
    "Dissolution of hardening phases during deformation in an A6061 Aluminium alloy";
    Procedia Engineering, 207 (2017), 37 - 41. BibTeX,


  20. J. Kreyca, E. Kozeschnik:
    "Flow Stress Modelling and Microstructure Development during Deformation of Metallic Materials";
    Materials Science Forum, 892 (2017), 44 - 49. BibTeX, More information


  21. J. Kreyca, E. Kozeschnik:
    "Temperature-dependent strain hardening, precipitation and deformationinduced microstructure evolution in AA 6061";
    Materials Science and Engineering A, 708 (2017), 411 - 418. BibTeX, More information


  22. D. Lang, E. Povoden-Karadeniz, J. Schatte, W. Knabl, H. Clemens, S. Primig:
    "Thermodynamic evaluation of the Mo-rich corner of the Mo-Hf-C system including O impurities";
    Journal of Alloys and Compounds, 695 (2017), 372 - 381. BibTeX, More information


  23. S. Primig, G. Stechauner, E. Kozeschnik:
    "Early Stages of Cu Precipitation in 15 - 5 PH Maraging Steel Revisited - Part I: Experimental Analysis";
    Steel Research International, 88 (2017), 1; 1 - 10. BibTeX, More information


  24. R. Schnitzer, D. Zügner, P. Haslberger, W. Ernst, E. Kozeschnik:
    "Influence of alloying elements on the mechanical properties of high-strength weld metal";
    Science and Technology of Welding and Joining, Volume 22 (2017), 6; 536 - 543. BibTeX, More information


  25. G. Stechauner, S. Primig, E. Kozeschnik:
    "Early Stages of Cu Precipitation in 15-5 PH Maraging Steel Revisited - Part II: Thermokinetic Simulation";
    Steel Research International, 88 (2017), 1, 1600085. BibTeX,


  26. J. Svoboda, Y.V. Shan, E. Kozeschnik, F.D. Fischer:
    "Couples and pairs formation-thermodynamic and kinetic modelling applied to Al-Mg-Si";
    Modelling and Simulation in Materials Science and Engineering, 25 (2017), 6; 1 - 15. BibTeX, More information


  27. A. Vieweg, E. Povoden-Karadeniz, G. Ressel, P. Prevedel, T. Wojcik, F. Mendez-Martin, A. Stark, J. Keckes, E. Kozeschnik:
    "Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques";
    Materials & Design, 136 (2017), 214 - 222. BibTeX, More information


  28. R. Abart, J. Svoboda, P Jerabek, E. Povoden-Karadeniz, G Habler:
    "Kinetics of layer growth in a binary system with intermediate solid-solution and interfaces with finite mobility acting as non-ideal sources and sinks for vacancies: thermodynamic model and application to magnesio-aluminate spinel layer growth";
    American Journal of Science, 316 (2016), 309 - 328. BibTeX, More information


  29. A.H. Bork, E. Povoden-Karadeniz, J.L.M. Rupp:
    "Modeling thermochenmical solar-to-fuel conversion: CALPHAD for thermdynamic assessment studies of perovskite, exemplified for (La,Sr)MnO3";
    Advanced Energy Materials, 1601086 (2016). BibTeX, More information


  30. H. Buken, E. Kozeschnik:
    "State parameter-based modelling of microstructure evolution in micro-alloyed steel during hot forming";
    IOP Conference Series: Materials Science and Engineering, 119 (2016), 012023; 7 pages. BibTeX, More information


  31. H. Buken, P. Sherstnev, E. Kozeschnik:
    "A state parameter-based model for static recrystallization interacting with precipitation";
    Modelling and Simulation in Materials Science and Engineering, 24 (2016), 035006. BibTeX, More information


  32. S. Cha, S. Hong, M. Kim, J. Park, W. Jung, M. Rath, E. Kozeschnik:
    "CALPHAD-based alloy design for advanced automotive steels - Part II: Compositional and microstructural modification for advanced carburizing steels";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 54 (2016), 172 - 180. BibTeX, More information


  33. F.D. Fischer, J. Svoboda, T. Antretter, E. Kozeschnik:
    "Stress relaxation by power-law creep during growth of a misfitting precipitate";
    International Journal of Solids and Structures, 96 (2016), 74 - 80. BibTeX, More information


  34. Jacob, C. Schmetterer, A. Khvan, A. Kondratiec, Ivanov, Hallstedt et al.:
    "Liquidus projection and thermodynamic modeling of the Cr-Fe-Nb ternary system";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 54 (2016), 1 - 15. BibTeX, More information


  35. D. Lang, E. Povoden-Karadeniz et al.:
    "On the chemistry of the carbides in a molybdenum base Mo-Hf-C alloy produced by powder metallurgy";
    Journal of Alloys and Compounds, 654 (2016), 445 - 454. BibTeX,


  36. M. Lückl, O. Caliskanoglu, S. Ilie, J. Six, E. Kozeschnik:
    "Impact of Surface Structure Control Cooling during Continuous Casting on Hot Ductility of Microallyed Steel";
    Steel Research International, 87 (2016), 871 - 879. BibTeX, More information


  37. M. Lückl, S. Zamberger, E. Kozeschnik:
    "Kinetics Simulation of MnS Precipitation in Electrical Steel";
    Steel Research International, 87 (2016), 271 - 275. BibTeX, More information


  38. M. Schmidtchen, A. Rimnac, P. Warczok, E. Kozeschnik, C. Bernhard, S. Bragin, R. Kawalla, B. Linzer:
    "Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model";
    IOP Conference Series: Materials Science and Engineering, 119 (2016), 012001; 8 pages. BibTeX, More information


  39. M. Stopher, P. Lang, E. Kozeschnik, P. Rivera-Diaz-Del-Castillo:
    "Modelling hydrogen migration and trapping in steels";
    Materials & Design, 106 (2016), 205 - 215. BibTeX, More information


  40. J. Svoboda, F.D. Fischer, H. Riedel, E. Kozeschnik:
    "Precipitate growth in multi-component systems with stress relaxation by diffusion and creep";
    International Journal of Plasticity, 82 (2016), 112 - 126. BibTeX, More information


  41. J. Svoboda, Y.V. Shan, E. Kozeschnik, F.D. Fischer:
    "A thermokinetic model for Mg-Si couple formation in Al-Mg-Si alloys";
    Modelling and Simulation in Materials Science and Engineering, 24 (2016), 1 - 16. BibTeX, More information


  42. S. Zamberger, P. Lang, G. Klösch, J. Klarner, E. Kozeschnik:
    "Long-range diffusion of H in the presence of traps in a microalloyed steel";
    Computational Materials Science, 113 (2016), 266 - 274. BibTeX, More information


  43. W. Zhang, P.V. Hendriksen, E. Povoden-Karadeniz, M. Chen:
    "Thermodynamic modeling of the Sr-Co-Fe-O system";
    Solid State Ionics, 292 (2016), 88 - 97. BibTeX, More information


  44. F. Fischer, J. Svoboda, T. Antretter, E. Kozeschnik:
    "Relaxation of a precipitate misfit stress state by creep in the matrix";
    International Journal of Plasticity, 64 (2015), 164 - 176. BibTeX, More information


  45. J. Hofstetter, E. Martinelli, S Pogatscher, P. Schmutz, E. Povoden-Karadeniz et al.:
    "Influence of trace impurities on the in vitro and in vivo degradation of biodegradable Mg-5Zn-0.3Ca alloys";
    Acta Biomaterialia, 23 (2015), 347 - 353. BibTeX, More information


  46. J. Hofstetter, S. Rüedi, I. Baumgartner, H. Kilian, B. Mingler, E. Povoden-Karadeniz et al.:
    "Processing and microstructure-property relations of high-strength low-alloy (HSLA) Mg-Zn-Ca alloys";
    Acta Materialia, 98 (2015), 423 - 432. BibTeX, More information


  47. P. Lang, M. Rath, E. Kozeschnik, P. Rivera-Diaz-Del-Castillo:
    "Modelling the influence of austenitisation temperature on hydrogen trapping in Nb containing martensitic steels";
    Scripta Materialia, 101 (2015), 101; 60 - 63. BibTeX, More information


  48. E. Povoden-Karadeniz, P. Lang, F Moszner, S Pogatscher, A. Ruban, P.J. Uggowitzer, E. Kozeschnik:
    "Thermodynamics of Pd-Mn phases and extension to the Fe-Mn-Pd system";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 51 (2015), 314 - 333. BibTeX,


  49. J. Shim, E. Povoden-Karadeniz, E. Kozeschnik, B. Wirth:
    "Modeling precipitation thermodynamics and kinetics in type 316 austenitic stainless steels with varying composition as an initial step toward predicting phase stability during irradiation";
    Journal of Nuclear Materials, 462 (2015), 250 - 257. BibTeX, More information


  50. G. Stechauner, E. Kozeschnik:
    "Thermo-kinetic modeling of Cu precipitation in α-Fe";
    Acta Materialia, 100 (2015), 135 - 146. BibTeX, More information


  51. J. Svoboda, Y.V. Shan, F.D. Fischer:
    "A new self-consistent model for thermodynamics of binary solutions";
    Scripta Materialia, 108 (2015), 27 - 30. BibTeX, More information


  52. J. Svoboda, G. Zickler, E. Kozeschnik, F.D. Fischer:
    "Kinetics of interstitial segregation in Cottrell atmospheres and grain boundaries";
    Philosophical Magazine Letters, Vol 95, No. 9 (2015), 9; 458 - 465. BibTeX, More information


  53. S. Zamberger, L.C. Whitmore, S. Krisam, T. Wojcik, E. Kozeschnik:
    "Experimental and computational study of cementite precipitation in tempered martensite";
    Modelling and Simulation in Materials Science and Engineering, 23 (2015), Number 5, Paper 055012. BibTeX, More information


  54. J. Zenisek, E. Kozeschnik, J. Svoboda, F.D. Fischer:
    "Modelling the role of compositional fluctuations in nucleation kinetics";
    Acta Materialia, 91 (2015), 91; 365 - 376. BibTeX, More information


  55. M.R. Ahmadi, E. Povoden-Karadeniz, K. Öksüz, A. Falahati, E. Kozeschnik:
    "A model for precipitation strengthening in multi-particle systems";
    Computational Materials Science, 91 (2014), 173 - 186. BibTeX,


  56. M.R. Ahmadi, E. Povoden-Karadeniz, B. Sonderegger, K. Öksüz, A. Falahati, E. Kozeschnik:
    "A model for coherency strengthening of large precipitates";
    Scripta Materialia, 84-85 (2014), 47 - 50. BibTeX,


  57. M.R. Ahmadi, E. Povoden-Karadeniz, L.C. Whitmore, M. Stockinger, A. Falahati, E. Kozeschnik:
    "Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation";
    Materials Science and Engineering A, 608 (2014), 114 - 122. BibTeX,


  58. M.R. Ahmadi, B. Sonderegger, E. Povoden-Karadeniz, A. Falahati, E. Kozeschnik:
    "Precipitate strengthening of non-spherical precipitates extended in < 100 > or {100} direction in fcc crystals";
    Materials Science and Engineering A, 590 (2014), 262 - 266. BibTeX,


  59. M.R. Ahmadi, L.C. Whitmore, E. Povoden-Karadeniz, M. Stockinger, A. Falahati, E. Kozeschnik:
    "Simulation of yield strength in AllvacR 718PlusTM";
    Advanced Materials Research, 922 (2014), 7 - 12. BibTeX, More information


  60. A. Falahati, W. Jun, P. Lang, M.R. Ahmadi, E. Povoden-Karadeniz, E. Kozeschnik:
    "Assessment of parameters for precipitation simulation of heat treatable aluminum alloys using differential scanning calorimetry";
    Transactions of Nonferrous Metals Society of China, 24 (2014), 2157 - 2167. BibTeX, More information


  61. P. Lang, E. Povoden-Karadeniz, A. Falahati, E. Kozeschnik:
    "Simulation of the effect of composition on the precipitation in 6xxx Al alloys during continuous-heating DSC";
    Journal of Alloys and Compounds, 612 (2014), 443 - 449. BibTeX,


  62. P. Lang, Y.V. Shan, E. Kozeschnik:
    "The life-time of structural vacancies in the presence of solute trapping";
    Materials Science Forum, 794 - 796 (2014), 963 - 970. BibTeX, More information


  63. P. Lang, T. Weisz, M.R. Ahmadi, E. Povoden-Karadeniz, A. Falahati, E. Kozeschnik:
    "Thermo-kinetic simulation of the yield strength evolution of AA7075 during natural aging";
    Advanced Materials Research, 922 (2014), 406 - 411. BibTeX, More information


  64. P. Lang, T. Wojcik, E. Povoden-Karadeniz, A. Falahati, E. Kozeschnik:
    "Thermo-kinetic prediction of metastable and stable phase precipitation in Al-Zn-Mg series aluminium alloys during non-isothermal DSC analysis";
    Journal of Alloys and Compounds, 609 (2014), 129 - 136. BibTeX, More information


  65. P. Lang, T. Wojcik, E. Povoden-Karadeniz, E. Kozeschnik et al.:
    "Crystal structure and free energy of Ti2Ni3 precipitates in Ti-Ni alloys from first principles";
    Computational Materials Science, 93 (2014), 46 - 49. BibTeX, More information


  66. C. Maier, S. Lüftl, E. Kozeschnik:
    "Study of molten metal droplet adhesion to organic anti-spatter coatings";
    Science and Technology of Welding and Joining, 19 (2014), 8; 638 - 645. BibTeX,


  67. F Moszner, E. Povoden-Karadeniz, S Pogatscher, P.J. Uggowitzer, Y. Estrin, Ssa Gerstl, E. Kozeschnik, Jf Löffler:
    "Reverse alpha' -> gamma transformation mechanisms of martensitic Fe-Mn and age-hardenable Fe-Mn-Pd alloys upon fast and slow continuous heating";
    Acta Materialia, 72 (2014), 99 - 109. BibTeX,


  68. M. Nöhrer, W. Mayer, S. Primig, S. Zamberger, E. Kozeschnik, H. Leitner:
    "Influence of Deformation on the Precipitation Behavior of Nb(CN) in Austenite and Ferrite";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 45A (2014), Sept; 4210 - 4219. BibTeX, More information


  69. M. Nöhrer, W. Mayer, S. Zamberger, E. Kozeschnik, H. Leitner:
    "Precipitation Behavior of Strain- Induced V Precipitates in Ferrite at Different Temperatures in a 0.2 wt% Carbon Steel";
    Steel Research International, 85 (2014), 4; 679 - 688. BibTeX, More information


  70. S Pogatscher, E. Kozeschnik, H. Antrekowitsch, M. Werinos, Ssa Gerstl, Jf Löffler, P.J. Uggowitzer:
    "Process-controlled suppression of natural aging in an Al-Mg-Si alloy";
    Scripta Materialia, 89 (2014), 53 - 56. BibTeX, More information


  71. E. Povoden-Karadeniz, E. Eidenberger, P. Lang, G. Stechauner, H. Leitner, E. Kozeschnik:
    "Simulation of precipitate evolution in Fe-25 Co-15 Mo with Si addition based on computational thermodynamics";
    Journal of Alloys and Compounds, 587 (2014), 158 - 170. BibTeX,


  72. S. Primig, H. Leitner, E. Kozeschnik:
    "Early Stages of Precipitation: Experiments and Modelling";
    Berg- und Hüttenmännische Monatshefte (BHM), 159 (2014), 1; 5 - 11. BibTeX, More information


  73. Y.V. Shan, J. Svoboda, F.D. Fischer, E. Kozeschnik:
    "Determination of Substitutional-Interstitial Interaction from Chemical";
    Advanced Materials Research, Vol 922 (2014), 922; 645 - 650. BibTeX, More information


  74. G. Stechauner, E. Kozeschnik:
    "Assessment of substitutional self-diffusion along short-circuit paths in Al, Fe and Ni";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 47 (2014), 92 - 99. BibTeX, More information


  75. G. Stechauner, E. Kozeschnik:
    "Self-Diffusion in Grain Boundaries and Dislocation Pipes in Al, Fe, and Ni and Application to AlN Precipitation in Steel";
    Journal of Materials Engineering and Performance, 23 (2014), 5; 1576 - 1579. BibTeX, More information


  76. J. Svoboda, Y.V. Shan, E. Kozeschnik, F.D. Fischer:
    "Determination of depths of multiple traps for interstitials and their influence on diffusion kinetics";
    Modelling and Simulation in Materials Science and Engineering, 22 (2014), 6; 1 - 16. BibTeX, More information


  77. A. Timoshenkov, P. Warczok, M. Albu, J. Klarner, E. Kozeschnik, R. Bureau, C. Sommitsch:
    "Modelling the dynamic recrystallization in C-Mn micro-alloyed steel during thermo-mechanical treatment using cellular automata";
    Computational Materials Science, 94 (2014), 85 - 94. BibTeX, More information


  78. A. Timoshenkov, P. Warczok, M. Albu, J. Klarner, E. Kozeschnik, G. Gruber, C. Sommitsch:
    "Influence of deformation on phase transformation and precipitation of steels for oil country tubular goods";
    Steel Research International, 85 (2014), 6; 954 - 967. BibTeX, More information


  79. L.C. Whitmore, M.R. Ahmadi, L Guetaz, H. Leitner, E. Povoden-Karadeniz, M. Stockinger, E. Kozeschnik:
    "The microstructure of heat-treated nickel-based superalloy 718Plus";
    Materials Science and Engineering A, 610 (2014), 39 - 45. BibTeX,


  80. L.C. Whitmore, M.R. Ahmadi, M. Stockinger, E. Povoden-Karadeniz, E. Kozeschnik, H. Leitner:
    "Microstructural investigation of thermally aged nickel-based superalloy 718Plus";
    Materials Science and Engineering A, 594 (2014), 253 - 259. BibTeX, More information


  81. F. Appel, D Herrmann, F.D. Fischer, J. Svoboda, E. Kozeschnik:
    "Role of vacancies in work hardening and fatigue of TiAl alloys";
    International Journal of Plasticity, 42 (2013), 83 - 100. BibTeX, More information


  82. E. Cabrol, C. Bellot, P. Lamesle, D. Delagnes, E. Povoden-Karadeniz:
    "Experimental investigation and thermodynamic modeling of molybdenum and vanadium-containing carbide hardened iron-based alloys";
    Journal of Alloys and Compounds, 556 (2013), 203 - 209. BibTeX,


  83. J. Farren, A. Hunter, J. Dupont, C. Robino, E. Kozeschnik, D. Seidman:
    "Microstructural Evolution and Mechanical Properties of Simulated Heat-Affected Zones in an Iron-Copper Based Multicomponent Steel";
    Welding Journal, 92 (2013), 5; 140 - 147. BibTeX, More information


  84. F.D. Fischer, J. Svoboda, E. Kozeschnik:
    "Interstitial diffusion in systems with multiple sorts of traps";
    Modelling and Simulation in Materials Science and Engineering, 21 (2013), 025008 - 025020. BibTeX, More information


  85. P. Lang, E. Kozeschnik:
    "Modellierung und Simulation zur Qualitätsverbesserung und Effizienzsteigerung";
    AluReport, 02.2013 (2013), 8 - 9. BibTeX,


  86. P. Lang, M. Lang, A. Falahati, E. Kozeschnik:
    "The Effect of Si on the Precipitation Behaviour in Al-Mg-Si Alloys Studied by Thermo-kinetic Simulation and DSC Experiments";
    Berg- und Hüttenmännische Monatshefte (BHM), 159 (2013), 3; 116 - 121. BibTeX, More information


  87. F. Mas, C. Tassin, E. Kozeschnik, F. Roch, P. Todeschini:
    "Microstructures formation and phase transformations around the interface of welds between dissimilar steels";
    MATEC Web of Conferences, Volume 7 (2013), 02001; 3 pages. BibTeX,


  88. E. Povoden-Karadeniz, D. Cirstea, P. Lang, T. Wojcik, E. Kozeschnik:
    "Thermodynamics of Ti-Ni shape memory alloys";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 41 (2013), 10; 128 - 139. BibTeX,


  89. E. Povoden-Karadeniz, P. Lang, P. Warczok, A. Falahati, W. Jun, E. Kozeschnik:
    "CALPHAD modeling of metastable phases in the Al-Mg-Si system";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 43 (2013), 12; 94 - 104. BibTeX,


  90. J. Svoboda, Y.V. Shan, E. Kozeschnik, F.D. Fischer:
    "Determination of depths of traps for interstitials from thermodynamic data: a new view on carbon trapping and diffusion";
    Modelling and Simulation in Materials Science and Engineering, 21 (2013), 6; 065012 - 065026. BibTeX, More information


  91. S. Zamberger, T. Wojcik, J. Klarner, G. Klösch, H. Schifferl, E. Kozeschnik:
    "Computational and Experimental Analysis of Carbo-Nitride Precipitation in Tempered Martensite";
    Steel Research International, 84 (2013), 1; 20 - 30. BibTeX, More information


  92. J. Farren, A. Hunter, J. Dupont, D. Seidman, C. Robino, E. Kozeschnik:
    "Microstructural Evolution and Mechanical Properties of Fusion Welds in an Iron-Copper-Based Multicomponent Steel";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 43A (2012), 4155 - 4170. BibTeX, More information


  93. S. Großeiber, S. Ilie, C. Poletti, B. Harrer, H.P. Degischer:
    "Influence of Strain Rate on Hot Ductility of a V-Microalloyed Steel Slab";
    Steel Research International, 83 (2012), 5; 445 - 455. BibTeX, More information


  94. T. Ivas, A. Grundy, E. Povoden-Karadeniz, L.J. Gauckler:
    "Phase diagram of CeO2-CoO for nano sized powders";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 36 (2012), 57 - 64. BibTeX, More information


  95. T. Ivas, E. Povoden-Karadeniz, A. Grundy, E. Jud-Sierra, J. Grässlin, L.J. Gauckler:
    "Experimental phase diagram determination and thermodynamic assessment of the CeO2-Gd2O3-CoO system";
    Journal of the American Ceramic Society, 96 (2012), 2; 613 - 626. BibTeX, More information


  96. J. Jung, E. Kozeschnik, S. Han, B. De Cooman:
    "Analysis of the Mechanical Properties of N-Added CMn Structural Steel by the Impulse Internal Friction Technique";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 43A (2012), 4587 - 4600. BibTeX, More information


  97. M. Maalekian, R. Radis, M. Militzer, A. Moreau, W. Poole:
    "In situ measurement and modelling of austenite grain growth in a Ti/Nb microalloyed steel";
    Acta Materialia, 60 (2012), 3; 1015 - 1026. BibTeX, More information


  98. C. Poletti, T. Wojcik, C. Sommitsch:
    "Hot Deformation of AA6082 Containing Fine Intermetallic Particles";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, online first (2012), 1 - 10. BibTeX, More information


  99. E. Povoden-Karadeniz, M. Chen, T. Ivas, A. Grundy, L.J. Gauckler:
    "Thermodynamic modeling of La2O3-SrO-Mn2O3-Cr2O3 for solid oxide fuel cell applications";
    Journal of Materials Research, 27 (2012), 15; 1915 - 1926. BibTeX, More information


  100. E. Povoden-Karadeniz, E. Kozeschnik:
    "Simulation of Precipitation Kinetics and Precipitation Strengthening of B2-precipitates in Martensitic PH 13-8 Mo Steel";
    ISIJ International, 52 (2012), 4; 610 - 615. BibTeX, More information


  101. R. Radis, E. Kozeschnik:
    "Numerical simulation of NbC precipitation in microalloyed steel";
    Modelling and Simulation in Materials Science and Engineering, 20 (2012), 055010 - 055024. BibTeX, More information


  102. R. Radis, C. Schlacher, E. Kozeschnik, P. Mayr, N. Enzinger, H. Schröttner, C. Sommitsch:
    "Loss of Ductility Caused by AlN Precipitation in Hadfield Steel";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 43A (2012), 1132 - 1139. BibTeX, More information


  103. B. Sonderegger, E. Kozeschnik:
    "Particle strengthening in fcc crystals with prolate and oblate precipitates";
    Scripta Materialia, 66 (2012), 52 - 55. BibTeX, More information


  104. P. Warczok, J. Zenisek, E. Kozeschnik:
    "Atomistic and continuums modeling of cluster migration and coagulation in precipitation reactions";
    Computational Materials Science, 60 (2012), 59 - 65. BibTeX, More information


  105. L.C. Whitmore, H. Leitner, E. Povoden-Karadeniz, R. Radis, M. Stockinger et al.:
    "Transmission electron microscopy of single and double aged 718Plus superalloy";
    Materials Science and Engineering A, 534 (2012), 413 - 423. BibTeX, More information


  106. S. Zamberger, M. Pudar, K. Spiradek-Hahn, M. Reischl, E. Kozeschnik:
    "Numerical simulation of the evolution of primary and secondary Nb(CN), Ti(CN) and AlN in Nb-microalloyed steel during continuous casting";
    International Journal of Materials Research, 103 (2012), 6; 680 - 687. BibTeX, More information


  107. F.D. Fischer, J. Svoboda, F. Appel, E. Kozeschnik:
    "Modeling of excess vacancy annihilation at different types of sinks";
    Acta Materialia, 59 (2011), 9; 3463 - 3472. BibTeX, More information


  108. S. Konovalov, U. Prahl, R. Kohlmann, E. Kozeschnik, W. Bleck:
    "Precipitation development simulation of high-temperature carburization along the process chain";
    HTM Journal of Heat Treatment and Materials, 66 (2011), 4; 217 - 229. BibTeX, More information


  109. R. Radis, S. Schwarz, S. Zamberger, E. Kozeschnik:
    "AlN Precipitation During Isothermal Annealing of Ultra Low Carbon Steel";
    Steel Research International, 82 (2011), 8; 905 - 910. BibTeX, More information


  110. B. Sonderegger, I. Holzer, E. Kozeschnik, C. Sommitsch:
    "Particle distance distributions and their effect on precipitation strengthening";
    Computer Methods in Materials Science, 11 (2011), 1; 148 - 153. BibTeX, More information


  111. J. Svoboda, E. Gamsjaeger, F.D. Fischer, Y. Liu, E. Kozeschnik:
    "Diffusion processes in a migrating interface: The thick-interface model";
    Acta Materialia, 59 (2011), 12; 4775 - 4786. BibTeX, More information


  112. P. Warczok, D. Reith, M. Schober, H. Leitner, R. Podloucky, E. Kozeschnik:
    "Investigation of Cu precipitation in bcc-Fe - Comparison of numerical analysis with experiment";
    International Journal of Materials Research, 102 (2011), 6; 709 - 716. BibTeX, More information


  113. D. Anghelina, R. Kienreich, S. Zamberger, J. Zamberger, E. Kozeschnik, R. Schneider:
    "Kinetics and control of scaling for reduced surface decarburization of spring steels";
    Metalurgia International, 15 (2010), 5 - 8. BibTeX,


  114. D. Burzic, J. Zamberger, E. Kozeschnik:
    "Non-destructive evaluation of decarburization of spring steel using electromagnetic measurement";
    Nondestructive Testing And Evaluation, 43 (2010), 446 - 450. BibTeX,


  115. A. Falahati, E. Povoden-Karadeniz, P. Lang, P. Warczok, E. Kozeschnik:
    "Thermo-kinetic computer simulation of differential scanning calorimetry curves of AlMgSi alloys";
    International Journal of Materials Research, Vol. 101 (2010), 9; 1089 - 1096. BibTeX, More information


  116. I. Holzer, E. Kozeschnik:
    "Computer simulation of the yield strength evolution in Cu-precipitation strengthened ferritic steel";
    Materials Science and Engineering A, 527 (2010), 3546 - 3551. BibTeX,


  117. I. Holzer, E. Kozeschnik:
    "Simulation of copper precipitation in fe-cu alloys";
    Materials Science Forum, 638-642 (2010), 2579 - 2584. BibTeX,


  118. I. Holzer, E. Kozeschnik, H. Cerjak:
    "New approach to predict the long-term creep behaviour and evolution of precipitate back-stress of 9-12% chromium steels";
    Transactions Of The Indian Institute Of Metals, 63 (2010), 137 - 143. BibTeX,


  119. T. Ivas, A. Grundy, E. Povoden-Karadeniz, S. Zeljkovic, L.J. Gauckler:
    "Experimental phase diagram determination and thermodynamic assessment of the Gd2O3-CoO system";
    Acta Materialia, 58 (2010), 12; 4077 - 4087. BibTeX, More information


  120. E. Kozeschnik, J. Svoboda, R. Radis, F.D. Fischer:
    "Mean-Field Model for the Growth and Coarsening of Stoichiometric Precipitates at Grain Boundaries";
    Modelling and Simulation in Materials Science and Engineering, 18 (2010), 015011; 1 - 19. BibTeX, More information


  121. M. Maalekian, E. Kozeschnik:
    "Modeling mechanical effects on promotion and retardation of martensitic transformation";
    Materials Science and Engineering A, 528 (2010), 1318 - 1325. BibTeX,


  122. M. Maalekian, E. Kozeschnik:
    "Modeling the effect of stress and plastic strain on martensite transformation";
    Materials Science Forum, 638-642 (2010), 2634 - 2639. BibTeX,


  123. M. Pudar, S. Zamberger, K. Spiradek-Hahn, R. Radis, E. Kozeschnik:
    "Computational Analysis of Precipitation during Continuous Casting of Microalloyed Steel";
    Steel Research International, 81 (2010), 5; 372 - 380. BibTeX, More information


  124. R. Radis, E. Kozeschnik:
    "Concurrent Precipitation of AlN and VN in Microalloyed Steel";
    Steel Research International, 81 (2010), 8; 681 - 685. BibTeX, More information


  125. R. Radis, E. Kozeschnik:
    "Kinetics of AlN Precipitation in Microalloyed Steel";
    Modelling and Simulation in Materials Science and Engineering, 18 (2010), 055003; 1 - 16. BibTeX, More information


  126. R. Radis, E. Kozeschnik:
    "Precipitation Kinetics of Aluminium Nitride in Austenite in Microalloyed HSLA Steels";
    Materials Science Forum, 636-637 (2010), 605 - 611. BibTeX, More information


  127. R. Radis, G. Zickler, M. Stockinger, C. Sommitsch, E. Kozeschnik:
    "Interaction of the Precipitation Kinetics of Delta and Gamma' Phases in Nickel-Base Superalloy ATI Allvac 718 Plus";
    Materials Science Forum, 638-642 (2010), 2712 - 2717. BibTeX, More information


  128. R. Schnitzer, R. Radis, M. Nöhrer, M. Schober, R. Hochfellner, S. Zinner, E. Povoden-Karadeniz, E. Kozeschnik, H. Leitner:
    "Reverted Austenite in PH 13-8 Mo Maraging Steels";
    Materials Chemistry and Physics, 122 (2010), 138 - 145. BibTeX, More information


  129. J. Shim, E. Kozeschnik, W. Jung, S. Lee, D. Kim, J. Suh, Y. Lee, Y. Cho:
    "Numerical simulation of long-term precipitate evolution in austenitic heat-resistant steels";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 34 (2010), 105 - 112. BibTeX,


  130. B. Sonderegger, I. Holzer, E. Kozeschnik:
    "Calculation of energies of coherent interfaces and application to the nucleation, growth and coarsening of precipitates";
    Materials Science Forum, 638-642 (2010), 2730 - 2735. BibTeX,


  131. B. Sonderegger, E. Kozeschnik:
    "Interfacial energy of diffuse phase boundaries in the generalized broken-bond approach";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 41 (2010), 3262 - 3269. BibTeX,


  132. B. Sonderegger, E. Kozeschnik, H. Leitner, H. Clemens, J. Svoboda, F. Fischer, P. Staron:
    "Kinetics of Precipitation in a Complex Hot-Work Tool Steel";
    Steel Research International, 81 (2010), 64 - 73. BibTeX,


  133. G. Zickler, R. Radis, R. Schnitzer, E. Kozeschnik, M. Stockinger, H. Leitner:
    "The Precipitation Behavior of Superalloy ATI Allvac®718Plus";
    Advanced Engineering Materials, 12 (2010), 176 - 183. BibTeX, More information


  134. D. Li, D. Anghelina, D. Burzic, W. Krieger, E. Kozeschnik:
    "Investigation of Decarburization in Spring Steel Production Process - Part II: Simulation";
    Steel Research International, 80 (2009), 4; 304 - 310. BibTeX, More information


  135. D. Li, D. Anghelina, D. Burzic, J. Zamberger, R. Kienreich, H. Schifferl, W. Krieger, E. Kozeschnik:
    "Investigation of Decarburization in Spring Steel Production Process - Part I: Experiments";
    Steel Research International, 80 (2009), 4; 298 - 303. BibTeX, More information


  136. R. Radis, M. Schaffer, M. Albu, G. Kothleitner, P. Pölt, E. Kozeschnik:
    "Multimodal size distributions of γ' precipitates during continuous cooling of UDIMET 720 Li";
    Acta Materialia, 57 (2009), 19; 5739 - 5747. BibTeX, More information


  137. B. Sonderegger, E. Kozeschnik:
    "Generalized nearest-neighbor broken-bond analysis of randomly oriented interfaces in multi-component fcc and bcc structures";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 40 (2009), 3; 499 - 510. BibTeX, More information


  138. B. Sonderegger, E. Kozeschnik:
    "Size dependence of the interfacial energy in the generalized nearest-neighbor broken-bond approach";
    Scripta Materialia, 60 (2009), 6; 635 - 638. BibTeX, More information


  139. G. Zickler, R. Schnitzer, R. Radis, R. Hochfellner, R. Schweins, M. Stockinger, H. Leitner:
    "Microstructure and Mechanical Properties of the Superalloy ATI Allvac 718Plus";
    Materials Science and Engineering A, 523 (2009), 1-2; 295 - 303. BibTeX, More information


  140. I. Holzer, E. Kozeschnik:
    "Predicted precipitate back-stress and creep rupture strength of the advanced 9-12 % Cr steel COST E2";
    International Journal of Materials Research, 99 (2008), 4; 416 - 421. BibTeX,


  141. E. Kozeschnik:
    "Thermodynamic prediction of the equilibrium chemical composition of critical nuclei: Bcc Cu precipitation in alpha-Fe";
    Scripta Materialia, 59 (2008), 1018 - 1021. BibTeX,


  142. P. Lazar, R. Podloucky, E. Kozeschnik, J. Redinger:
    "Density functional theory study of ternary V-Cr-N compounds";
    Physical Review B, 78 (2008), 1342021 - 1342028. BibTeX, More information


  143. M. Maalekian, E. Kozeschnik:
    "A thermodynamic model for carbon trapping in lattice defects";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 32 (2008), 650 - 654. BibTeX,


  144. B. Sonderegger, E. Kozeschnik, H. Leitner, H. Clemens, J. Svoboda, F. Fischer:
    "Computational analysis of the precipitation kinetics in a complex tool steel";
    International Journal of Materials Research, 99 (2008), 4; 410 - 415. BibTeX,


  145. J. Zenisek, E. Kozeschnik, J. Svoboda, F. Fischer:
    "A combined cluster dynamic/kinetic Monte Carlo model for precipitate nucleation in interstitial/substitutional alloys";
    Modelling and Simulation in Materials Science and Engineering, 16 (2008), 7. BibTeX, More information




This publication list has been generated automatically from the publication data of the Faculty of Mechanical and Industrial Engineering. Please invoke the page "Publications of the Faculty" directly for more complex searches and queries, or use the global search function of the Publication Database of the Vienna University of Technology!